AGS4 and DIGGS mapping¶
Mapping table 1.2: 25 of 25 groups reviewed
This is mapping table 1.2, used by pydiggs.convert in both directions:
ags4_to_diggs, and diggs_to_ags4 and model_to_ags4. A group's status is
draft until its rows have been reviewed, and reviewed after. Changing where a
heading goes is a new major version of the table; adding groups, headings or codes is a
minor one. Corrections from DIGGS and AGS practitioners are welcome: a mapping change
is a small diff to the TOML files under src/pydiggs/convert/mappings/.
The converter writes DIGGS 3.0.0. It reads AGS4 4.0.3, 4.0.4, 4.1, 4.1.1, 4.2, and writes AGS4 4.2 (the
default) or 4.1.1. As of November 2026 the BGS AGS validator (agsapi.bgs.ac.uk) and
python-ags4 1.2.0 accept AGS4 only up to 4.1.1: write ags_version="4.1.1" for files
meant for them. No published AGS4 to DIGGS mapping exists, so this table is original
work. It holds only AGS4 group and heading names, keys and parent groups; it copies
nothing else from the AGS4 data dictionary.
One table drives both directions: DIGGS to AGS4 writes each heading from the DIGGS value
it is read into below, and reports every DIGGS value with no heading here as
convert.unmapped-element. A heading marked to-diggs is used only from AGS4 to DIGGS,
one marked to-ags4 only the other way. pyDIGGS bundles no AGS4 data dictionary, so the
TYPE of each heading it writes is the one its values have.
Every non-null value of an AGS4 file is either carried into DIGGS or named by a
convert finding (see Findings). A group that is not listed here
is reported as convert.unmapped-group; a heading that is listed as not converted, or
not listed at all, as convert.unmapped-heading; and anything the file's own DICT
group defines as convert.user-defined.
Targets. key: identifies the record; it becomes the gml:id (made a valid XML id)
and the gml:name. link: a key of the parent record, used to attach this record to it.
field: a value the converter places itself (named in the table). param: a DIGGS
element, as Element/child; a measure is written only with a unit DIGGS 3.0.0 allows
for it, and is reported otherwise. column: a result column, named by its key in the
DIGGS property dictionary. format: AGS4 format information the
converter reads; it is not data. not converted: with the reason.
Values are carried as reported. Units are renamed only through the unit table, and nothing is converted numerically.
Depth units. The unit of LOCA_FDEP (m, ft or ftUS; the unit table gives DIGGS
m, ft or ft[US]) is the unit of every depth along a feature: it is the unit of each
feature's linear referencing system, of the CPT depth column and of an interval that starts
at the top of a hole. A file whose LOCA_FDEP has no unit, or one the converter does not
carry, is read in metres, as before. A depth heading in a unit other than that of the file
is reported as convert.unmapped-unit, naming both units, and not written. No depth is
ever converted from one unit to another.
PROJ¶
pattern project; status reviewed; keys PROJ_ID; DIGGS Project.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
PROJ_ID |
key gml:name |
reviewed |
PROJ_NAME |
field name |
reviewed |
PROJ_LOC |
field locality |
reviewed |
PROJ_CLNT |
not converted: a client is a business associate, which the converter does not write | reviewed |
PROJ_CONT |
not converted: a contractor is a business associate, which the converter does not write | reviewed |
PROJ_ENG |
not converted: an engineer is a business associate, which the converter does not write | reviewed |
PROJ_MEMO |
field remark |
reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
TRAN¶
pattern transmission; status reviewed; DIGGS DocumentInformation.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
TRAN_ISNO |
not converted: DocumentInformation has no issue number | reviewed |
TRAN_DATE |
field creation_date |
reviewed |
TRAN_PROD |
not converted: the producer is a business associate, which the converter does not write | reviewed |
TRAN_STAT |
not converted: DocumentInformation has no issue status | reviewed |
TRAN_DESC |
field description |
reviewed |
TRAN_AGS |
format: the AGS4 version of the source; it selects how the file is read | reviewed |
TRAN_RECV |
not converted: the recipient is a business associate, which the converter does not write | reviewed |
TRAN_DLIM |
format: the record link delimiter, an AGS4 format setting | reviewed |
TRAN_RCON |
format: the concatenation character, an AGS4 format setting | reviewed |
TRAN_REM |
not converted: DocumentInformation has no remark | reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
ABBR¶
pattern lookup; status reviewed; keys ABBR_HDNG, ABBR_CODE.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
ABBR_HDNG |
format: abbreviation lists are read by the converter, not converted | reviewed |
ABBR_CODE |
format: abbreviation lists are read by the converter, not converted | reviewed |
ABBR_DESC |
format: abbreviation lists are read by the converter, not converted | reviewed |
ABBR_LIST |
format: abbreviation lists are read by the converter, not converted | reviewed |
ABBR_REM |
format: abbreviation lists are read by the converter, not converted | reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
UNIT¶
pattern lookup; status reviewed; keys UNIT_UNIT.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
UNIT_UNIT |
format: units are mapped through units.toml, not converted | reviewed |
UNIT_DESC |
format: units are mapped through units.toml, not converted | reviewed |
UNIT_REM |
format: units are mapped through units.toml, not converted | reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
TYPE¶
pattern lookup; status reviewed; keys TYPE_TYPE.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
TYPE_TYPE |
format: data types are AGS4 format information | reviewed |
TYPE_DESC |
format: data types are AGS4 format information | reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
DICT¶
pattern lookup; status reviewed; keys DICT_TYPE, DICT_GRP, DICT_HDNG.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
DICT_TYPE |
format: the file's dictionary; user-defined groups and headings are reported, never interpreted | reviewed |
DICT_GRP |
format: the file's dictionary; user-defined groups and headings are reported, never interpreted | reviewed |
DICT_HDNG |
format: the file's dictionary; user-defined groups and headings are reported, never interpreted | reviewed |
DICT_STAT |
format: the file's dictionary; user-defined groups and headings are reported, never interpreted | reviewed |
DICT_DTYP |
format: the file's dictionary; user-defined groups and headings are reported, never interpreted | reviewed |
DICT_DESC |
format: the file's dictionary; user-defined groups and headings are reported, never interpreted | reviewed |
DICT_UNIT |
format: the file's dictionary; user-defined groups and headings are reported, never interpreted | reviewed |
DICT_EXMP |
format: the file's dictionary; user-defined groups and headings are reported, never interpreted | reviewed |
DICT_PGRP |
format: the file's dictionary; user-defined groups and headings are reported, never interpreted | reviewed |
DICT_REM |
format: the file's dictionary; user-defined groups and headings are reported, never interpreted | reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
LOCA¶
pattern feature; status reviewed; keys LOCA_ID.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
LOCA_ID |
key gml:name |
reviewed |
LOCA_TYPE |
field element |
reviewed |
LOCA_STAT |
not converted: no DIGGS 3.0.0 target | reviewed |
LOCA_NATE |
field location.x |
reviewed |
LOCA_NATN |
field location.y |
reviewed |
LOCA_GREF |
field location.crs |
reviewed |
LOCA_GL |
field location.z |
reviewed |
LOCA_REM |
field remark |
reviewed |
LOCA_FDEP |
field total_depth |
reviewed |
LOCA_STAR |
field when_constructed.start |
reviewed |
LOCA_PURP |
not converted: boreholePurpose is a code list; AGS4 gives free text | reviewed |
LOCA_TERM |
not converted: no DIGGS 3.0.0 target for the reason a hole was ended | reviewed |
LOCA_ENDD |
field when_constructed.end |
reviewed |
LOCA_LETT |
not converted: no DIGGS 3.0.0 target | reviewed |
LOCA_LOCX |
not converted: local site coordinates need a local CRS, not converted | reviewed |
LOCA_LOCY |
not converted: local site coordinates need a local CRS, not converted | reviewed |
LOCA_LOCZ |
not converted: local site coordinates need a local CRS, not converted | reviewed |
LOCA_LREF |
not converted: local site coordinates need a local CRS, not converted | reviewed |
LOCA_DATM |
not converted: a separate vertical datum is not converted | reviewed |
LOCA_ETRV |
not converted: traverse end coordinates are not converted | reviewed |
LOCA_NTRV |
not converted: traverse end coordinates are not converted | reviewed |
LOCA_LTRV |
not converted: traverse end coordinates are not converted | reviewed |
LOCA_XTRL |
not converted: traverse end coordinates are not converted | reviewed |
LOCA_YTRL |
not converted: traverse end coordinates are not converted | reviewed |
LOCA_ZTRL |
not converted: traverse end coordinates are not converted | reviewed |
LOCA_LAT |
field location.lat |
reviewed |
LOCA_LON |
field location.lon |
reviewed |
LOCA_ELAT |
not converted: traverse end coordinates are not converted | reviewed |
LOCA_ELON |
not converted: traverse end coordinates are not converted | reviewed |
LOCA_LLZ |
field location.datum |
reviewed |
LOCA_LOCM |
not converted: no DIGGS 3.0.0 target for how a location was found | reviewed |
LOCA_LOCA |
not converted: a grouping of locations by site sub-division (a tag, often a code in ABBR), not a description of the location | reviewed |
LOCA_CLST |
not converted: a grouping of locations, typically by investigation phase; DIGGS 3.0.0 has no target for it | reviewed |
LOCA_ALID |
not converted: alignments are not converted | reviewed |
LOCA_OFFS |
not converted: alignments are not converted | reviewed |
LOCA_CNGE |
not converted: alignments are not converted | reviewed |
LOCA_TRAN |
not converted: no DIGGS 3.0.0 target | reviewed |
LOCA_NATD |
field location.vertical_datum |
reviewed |
LOCA_ORID |
not converted: no DIGGS 3.0.0 target | reviewed |
LOCA_ORJO |
not converted: no DIGGS 3.0.0 target | reviewed |
LOCA_ORCO |
not converted: no DIGGS 3.0.0 target | reviewed |
LOCA_GLDT |
not converted: DIGGS 3.0.0 has no date for a ground level | reviewed |
LOCA_VSSL |
not converted: a survey vessel has no DIGGS 3.0.0 target | reviewed |
LOCA_NSRI |
field location.crs |
reviewed |
LOCA_LSRI |
not converted: local site coordinates need a local CRS, which the converter does not write | reviewed |
LOCA_LLSI |
field location.datum |
reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
GEOL¶
pattern interval-observation; status reviewed; keys LOCA_ID, GEOL_TOP, GEOL_BASE; parent LOCA; DIGGS LithologySystem.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
LOCA_ID |
link samplingFeatureRef |
reviewed |
GEOL_TOP |
field interval.top |
reviewed |
GEOL_BASE |
field interval.base |
reviewed |
GEOL_DESC |
param Lithology/lithDescription |
reviewed |
GEOL_LEG |
param Lithology/legendCode |
reviewed |
GEOL_GEOL |
not converted: a project geology code; its meaning is in the file's ABBR group, not a unit name | reviewed |
GEOL_GEO2 |
not converted: a second geology code has no DIGGS 3.0.0 target | reviewed |
GEOL_STAT |
not converted: no DIGGS 3.0.0 target | reviewed |
GEOL_BGS |
not converted: a BGS Lexicon code needs a DIGGS code list, not converted | reviewed |
GEOL_FORM |
field geologic_unit |
reviewed |
GEOL_BNDF |
not converted: the base boundary definition is not in the mapping (DIGGS baseBoundary is a candidate for a later table) | reviewed |
GEOL_REM |
field remark |
reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
SAMP¶
pattern sample; status reviewed; keys LOCA_ID, SAMP_TOP, SAMP_REF, SAMP_TYPE, SAMP_ID; parent LOCA; DIGGS Sample.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
LOCA_ID |
link samplingFeatureRef |
reviewed |
SAMP_TOP |
field interval.top |
reviewed |
SAMP_REF |
param Sample/internalIdentifier |
reviewed |
SAMP_TYPE |
param Sample/type |
reviewed |
SAMP_ID |
key gml:name |
reviewed |
SAMP_BASE |
field interval.base |
reviewed |
SAMP_DTIM |
field date |
reviewed |
SAMP_UBLO |
not converted: no DIGGS 3.0.0 target | reviewed |
SAMP_CONT |
not converted: no DIGGS 3.0.0 target | reviewed |
SAMP_PREP |
not converted: no DIGGS 3.0.0 target | reviewed |
SAMP_SDIA |
not converted: no DIGGS 3.0.0 target | reviewed |
SAMP_WDEP |
not converted: no DIGGS 3.0.0 target | reviewed |
SAMP_RECV |
param SamplingActivity/totalSampleRecovery (Dimensionless measure) |
reviewed |
SAMP_TECH |
not converted: no DIGGS 3.0.0 target | reviewed |
SAMP_MATX |
not converted: sampleMatrix is a code list; not converted | reviewed |
SAMP_TYPC |
not converted: no DIGGS 3.0.0 target | reviewed |
SAMP_WHO |
not converted: a person is a business associate, which the converter does not write | reviewed |
SAMP_WHY |
not converted: no DIGGS 3.0.0 target | reviewed |
SAMP_REM |
field remark |
reviewed |
SAMP_DESC |
field description |
reviewed |
SAMP_DESD |
not converted: no DIGGS 3.0.0 target | reviewed |
SAMP_LOG |
not converted: a person is a business associate, which the converter does not write | reviewed |
SAMP_COND |
not converted: no DIGGS 3.0.0 target | reviewed |
SAMP_CLSS |
not converted: no DIGGS 3.0.0 target | reviewed |
SAMP_BAR |
not converted: no DIGGS 3.0.0 target | reviewed |
SAMP_TEMP |
not converted: no DIGGS 3.0.0 target | reviewed |
SAMP_PRES |
not converted: no DIGGS 3.0.0 target | reviewed |
SAMP_FLOW |
not converted: no DIGGS 3.0.0 target | reviewed |
SAMP_ETIM |
not converted: no DIGGS 3.0.0 target | reviewed |
SAMP_DURN |
not converted: no DIGGS 3.0.0 target | reviewed |
SAMP_CAPT |
not converted: no DIGGS 3.0.0 target | reviewed |
SAMP_LINK |
not converted: record links are not converted | reviewed |
SAMP_RECL |
not converted: no DIGGS 3.0.0 target | reviewed |
GEOL_STAT |
not converted: no DIGGS 3.0.0 target | reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
ISPT¶
pattern test-per-row; status reviewed; keys LOCA_ID, ISPT_TOP; parent LOCA; DIGGS Test; procedure DrivenPenetrationTest; penetrationTestType = SPT.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
LOCA_ID |
link samplingFeatureRef |
reviewed |
ISPT_TOP |
field location |
reviewed |
ISPT_SEAT |
not converted: seating drive blows are not converted | reviewed |
ISPT_MAIN |
not converted: main drive blows are not converted (the N value is) | reviewed |
ISPT_NPEN |
param DrivenPenetrationTest/totalPenetration (Length measure) |
reviewed |
ISPT_NVAL |
column n_value |
reviewed |
ISPT_N60 |
column n60 |
reviewed |
ISPT_REP |
not converted: the reported result text has no DIGGS property | reviewed |
ISPT_CAS |
param DrivenPenetrationTest/depthCasing (Length measure) |
reviewed |
ISPT_WAT |
param DrivenPenetrationTest/waterDepth (Length measure) |
reviewed |
ISPT_TYPE |
not converted: no DIGGS 3.0.0 target | reviewed |
ISPT_HAM |
not converted: hammer identifiers are not converted | reviewed |
ISPT_ERAT |
param DrivenPenetrationTest/hammerEfficiency (Dimensionless measure) |
reviewed |
ISPT_INC1 |
not converted: drive sets are not converted | reviewed |
ISPT_INC2 |
not converted: drive sets are not converted | reviewed |
ISPT_INC3 |
not converted: drive sets are not converted | reviewed |
ISPT_INC4 |
not converted: drive sets are not converted | reviewed |
ISPT_INC5 |
not converted: drive sets are not converted | reviewed |
ISPT_INC6 |
not converted: drive sets are not converted | reviewed |
ISPT_PEN1 |
not converted: drive sets are not converted | reviewed |
ISPT_PEN2 |
not converted: drive sets are not converted | reviewed |
ISPT_PEN3 |
not converted: drive sets are not converted | reviewed |
ISPT_PEN4 |
not converted: drive sets are not converted | reviewed |
ISPT_PEN5 |
not converted: drive sets are not converted | reviewed |
ISPT_PEN6 |
not converted: drive sets are not converted | reviewed |
ISPT_ROCK |
not converted: no DIGGS 3.0.0 target | reviewed |
ISPT_SWP |
param DrivenPenetrationTest/selfWeightPenetration (Length measure) |
reviewed |
ISPT_REM |
field remark |
reviewed |
ISPT_ENV |
not converted: no DIGGS 3.0.0 target | reviewed |
ISPT_METH |
not converted: test method text is not converted | reviewed |
ISPT_CRED |
not converted: no DIGGS 3.0.0 target | reviewed |
TEST_STAT |
not converted: no DIGGS 3.0.0 target | reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
LLPL¶
pattern test-per-row; status reviewed; keys LOCA_ID, SAMP_TOP, SAMP_REF, SAMP_TYPE, SAMP_ID, SPEC_REF, SPEC_DPTH; parent SAMP; DIGGS Test; procedure AtterbergLimitsTest.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
LOCA_ID |
link samplingFeatureRef |
reviewed |
SAMP_TOP |
link sampleRef |
reviewed |
SAMP_REF |
link sampleRef |
reviewed |
SAMP_TYPE |
link sampleRef |
reviewed |
SAMP_ID |
link sampleRef |
reviewed |
SPEC_REF |
field name |
reviewed |
SPEC_DPTH |
field location |
reviewed |
SPEC_DESC |
field description |
reviewed |
SPEC_PREP |
not converted: specimen preparation text is not converted | reviewed |
LLPL_LL |
column liquid_limit |
reviewed |
LLPL_PL |
column plastic_limit |
reviewed |
LLPL_PI |
column plasticity_index |
reviewed |
LLPL_425 |
not converted: the percentage passing 425 um has no DIGGS property (DIGGS has percent retained on No. 40) | reviewed |
LLPL_PREP |
not converted: specimen preparation text is not converted | reviewed |
LLPL_METH |
not converted: test method text is not converted | reviewed |
LLPL_LAB |
not converted: a laboratory is a business associate, which the converter does not write | reviewed |
LLPL_CRED |
not converted: no DIGGS 3.0.0 target | reviewed |
LLPL_TYPE |
not converted: the test method (fall cone or Casagrande) is not in the mapping; DIGGS fallConeTrial and casagrandeTrial are candidates for a later table | reviewed |
LLPL_POIN |
not converted: the number of points of a test is not in the mapping | reviewed |
LLPL_CONE |
not converted: the type of fall cone is not in the mapping | reviewed |
LLPL_1PRE |
not converted: one-point test readings are not in the mapping | reviewed |
LLPL_1PCF |
not converted: one-point test readings are not in the mapping | reviewed |
LLPL_SIZE |
not converted: the sieve size is not in the mapping (values are never converted to DIGGS percentRetainedNo40) | reviewed |
LLPL_PASS |
not converted: the percentage passing the sieve is not in the mapping (values are never converted to DIGGS percentRetainedNo40) | reviewed |
LLPL_WC |
not converted: a water content before particles were removed has no DIGGS 3.0.0 property | reviewed |
LLPL_STAB |
not converted: stabiliser details have no DIGGS 3.0.0 target | reviewed |
LLPL_STYP |
not converted: stabiliser details have no DIGGS 3.0.0 target | reviewed |
LLPL_REM |
field remark |
reviewed |
LLPL_DEV |
not converted: deviations from the method are not converted | reviewed |
TEST_STAT |
not converted: no DIGGS 3.0.0 target | reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
LNMC¶
pattern test-per-row; status reviewed; keys LOCA_ID, SAMP_TOP, SAMP_REF, SAMP_TYPE, SAMP_ID, SPEC_REF, SPEC_DPTH; parent SAMP; DIGGS Test; procedure WaterContentTest.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
LOCA_ID |
link samplingFeatureRef |
reviewed |
SAMP_TOP |
link sampleRef |
reviewed |
SAMP_REF |
link sampleRef |
reviewed |
SAMP_TYPE |
link sampleRef |
reviewed |
SAMP_ID |
link sampleRef |
reviewed |
SPEC_REF |
field name |
reviewed |
SPEC_DPTH |
field location |
reviewed |
SPEC_DESC |
field description |
reviewed |
SPEC_PREP |
not converted: specimen preparation text is not converted | reviewed |
LNMC_MC |
column water_content_natural |
reviewed |
LNMC_TEMP |
param WaterContentTest/dryingTemperature (ThermodynamicTemperature measure) |
reviewed |
LNMC_STAB |
not converted: no DIGGS 3.0.0 target | reviewed |
LNMC_ISNT |
not converted: read to decide whether LNMC_MC is a natural water content (DIGGS water_content_natural is written only when it is not N); the flag itself is not written | reviewed |
LNMC_COMM |
not converted: no DIGGS 3.0.0 target | reviewed |
LNMC_METH |
not converted: test method text is not converted | reviewed |
LNMC_LAB |
not converted: a laboratory is a business associate, which the converter does not write | reviewed |
LNMC_CRED |
not converted: no DIGGS 3.0.0 target | reviewed |
LNMC_STYP |
not converted: stabiliser details have no DIGGS 3.0.0 target | reviewed |
LNMC_REM |
field remark |
reviewed |
LNMC_DEV |
not converted: deviations from the method are not converted | reviewed |
TEST_STAT |
not converted: no DIGGS 3.0.0 target | reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
GRAG¶
pattern test-table; status reviewed; keys LOCA_ID, SAMP_TOP, SAMP_REF, SAMP_TYPE, SAMP_ID, SPEC_REF, SPEC_DPTH; parent SAMP; DIGGS Test; procedure ParticleSizeTest; data group GRAT.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
LOCA_ID |
link samplingFeatureRef |
reviewed |
SAMP_TOP |
link sampleRef |
reviewed |
SAMP_REF |
link sampleRef |
reviewed |
SAMP_TYPE |
link sampleRef |
reviewed |
SAMP_ID |
link sampleRef |
reviewed |
SPEC_REF |
field name |
reviewed |
SPEC_DPTH |
field location |
reviewed |
SPEC_DESC |
field description |
reviewed |
SPEC_PREP |
not converted: specimen preparation text is not converted | reviewed |
GRAG_UC |
column coef_uniformity |
reviewed |
GRAG_VCRE |
not converted: AGS4 fractions use ISO 14688-1 size limits (63 mm, 2 mm, 63 um); the DIGGS 3.0.0 properties use ASTM limits (75 mm, 4.75 mm, 0.075 mm), so the fraction is not converted either way | reviewed |
GRAG_GRAV |
not converted: AGS4 fractions use ISO 14688-1 size limits (63 mm, 2 mm, 63 um); the DIGGS 3.0.0 properties use ASTM limits (75 mm, 4.75 mm, 0.075 mm), so the fraction is not converted either way | reviewed |
GRAG_SAND |
not converted: AGS4 fractions use ISO 14688-1 size limits (63 mm, 2 mm, 63 um); the DIGGS 3.0.0 properties use ASTM limits (75 mm, 4.75 mm, 0.075 mm), so the fraction is not converted either way | reviewed |
GRAG_SILT |
not converted: AGS4 fractions use ISO 14688-1 size limits (63 mm, 2 mm, 63 um); the DIGGS 3.0.0 properties use ASTM limits (75 mm, 4.75 mm, 0.075 mm), so the fraction is not converted either way | reviewed |
GRAG_CLAY |
column clay_percent_2_micron |
reviewed |
GRAG_CC |
column coef_curvature |
reviewed |
GRAG_FINE |
not converted: AGS4 fractions use ISO 14688-1 size limits (63 mm, 2 mm, 63 um); the DIGGS 3.0.0 properties use ASTM limits (75 mm, 4.75 mm, 0.075 mm), so the fraction is not converted either way | reviewed |
GRAG_METH |
not converted: test method text is not converted | reviewed |
GRAG_LAB |
not converted: a laboratory is a business associate, which the converter does not write | reviewed |
GRAG_CRED |
not converted: no DIGGS 3.0.0 target | reviewed |
GRAG_PRET |
not converted: the pre-treatment method is not in the mapping | reviewed |
GRAG_SUFF |
not converted: whether the specimen mass was sufficient has no DIGGS 3.0.0 target | reviewed |
GRAG_EXCL |
not converted: how excluded material was measured has no DIGGS 3.0.0 target | reviewed |
GRAG_PDEN |
not converted: the particle density used is not in the mapping | reviewed |
GRAG_REM |
field remark |
reviewed |
GRAG_DEV |
not converted: deviations from the method are not converted | reviewed |
TEST_STAT |
not converted: no DIGGS 3.0.0 target | reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
GRAT¶
pattern test-table; status reviewed; keys LOCA_ID, SAMP_TOP, SAMP_REF, SAMP_TYPE, SAMP_ID, SPEC_REF, SPEC_DPTH, GRAT_SIZE; parent GRAG; DIGGS Grading.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
LOCA_ID |
link Test |
reviewed |
SAMP_TOP |
link Test |
reviewed |
SAMP_REF |
link Test |
reviewed |
SAMP_TYPE |
link Test |
reviewed |
SAMP_ID |
link Test |
reviewed |
SPEC_REF |
link Test |
reviewed |
SPEC_DPTH |
link Test |
reviewed |
GRAT_SIZE |
param Grading/particleSize (ParticleSize measure) |
reviewed |
GRAT_PERP |
param Grading/percentPassing (MassPerMass measure) |
reviewed |
GRAT_TYPE |
field method |
reviewed |
GRAT_REM |
field remark |
reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
HORN¶
pattern feature-component; status reviewed; keys LOCA_ID, HORN_TOP, HORN_BASE; parent LOCA.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
LOCA_ID |
not converted: hole orientation is not converted: AGS4 measures inclination positively down from horizontal, DIGGS 3.0.0 plunge positively up, and values are never converted | reviewed |
HORN_TOP |
not converted: hole orientation is not converted: AGS4 measures inclination positively down from horizontal, DIGGS 3.0.0 plunge positively up, and values are never converted | reviewed |
HORN_BASE |
not converted: hole orientation is not converted: AGS4 measures inclination positively down from horizontal, DIGGS 3.0.0 plunge positively up, and values are never converted | reviewed |
HORN_ORNT |
not converted: hole orientation is not converted: DIGGS 3.0.0 gives one bearing per feature, AGS4 one per section | reviewed |
HORN_INCL |
not converted: hole orientation is not converted: AGS4 measures inclination positively down from horizontal, DIGGS 3.0.0 plunge positively up, and values are never converted | reviewed |
HORN_REM |
not converted: hole orientation is not converted | reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
HDIA¶
pattern feature-component; status reviewed; keys LOCA_ID, HDIA_DPTH; parent LOCA; DIGGS BoreholeDiameter; held by the feature's holeDiameter; each section starts at the base of the one above (the first at 0).
| AGS4 heading | DIGGS target | Status |
|---|---|---|
LOCA_ID |
link samplingFeatureRef |
reviewed |
HDIA_DPTH |
field interval.base |
reviewed |
HDIA_DIAM |
param BoreholeDiameter/diameter (Length measure) |
reviewed |
HDIA_REM |
field remark |
reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
CDIA¶
pattern feature-component; status reviewed; keys LOCA_ID, CDIA_DPTH; parent LOCA; DIGGS Casing; held by the feature's casing; each runs from the surface (0) to its depth.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
LOCA_ID |
link samplingFeatureRef |
reviewed |
CDIA_DPTH |
field interval.base |
reviewed |
CDIA_DIAM |
not converted: AGS4 gives a casing diameter without saying inside or outside; DIGGS 3.0.0 has casingOutsideDiameter and casingInsideDiameter, and the converter does not choose | reviewed |
CDIA_REM |
field remark |
reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
BKFL¶
pattern feature-component; status reviewed; keys LOCA_ID, BKFL_TOP; parent LOCA; DIGGS BackfillLayer; held by the feature's backfill; inside a Backfill.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
LOCA_ID |
link samplingFeatureRef |
reviewed |
BKFL_TOP |
field interval.top |
reviewed |
BKFL_BASE |
field interval.base |
reviewed |
BKFL_DESC |
param BackfillLayer/backfillMaterial |
reviewed |
BKFL_LEG |
not converted: a backfill legend code has no DIGGS 3.0.0 target | reviewed |
BKFL_DATE |
not converted: AGS4 gives the date the backfill was completed; DIGGS 3.0.0 gives the interval a layer was placed in | reviewed |
BKFL_REM |
field remark |
reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
WSTG¶
pattern feature-component; status reviewed; keys LOCA_ID, WSTG_DPTH; parent LOCA; DIGGS WaterStrike; data group WSTD; held by the feature's waterStrike.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
LOCA_ID |
link samplingFeatureRef |
reviewed |
WSTG_DPTH |
field strike.location |
reviewed |
WSTG_DTIM |
field strike.dateTime |
reviewed |
WSTG_SEAL |
field location |
reviewed |
WSTG_CAS |
field bottomCasing |
reviewed |
WSTG_REM |
field remark |
reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
WSTD¶
pattern feature-component; status reviewed; keys LOCA_ID, WSTG_DPTH, WSTD_NMIN; parent WSTG; DIGGS LinkedWSReading; held by the feature's linkedReading.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
LOCA_ID |
link WaterStrike |
reviewed |
WSTG_DPTH |
link WaterStrike |
reviewed |
WSTD_NMIN |
param LinkedWSReading/elapsedTime (Time measure) |
reviewed |
WSTD_POST |
field location |
reviewed |
WSTD_REM |
field remark |
reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
LDEN¶
pattern test-per-row; status reviewed; keys LOCA_ID, SAMP_TOP, SAMP_REF, SAMP_TYPE, SAMP_ID, SPEC_REF, SPEC_DPTH; parent SAMP; DIGGS Test; procedure LabDensityTest.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
LOCA_ID |
link samplingFeatureRef |
reviewed |
SAMP_TOP |
link sampleRef |
reviewed |
SAMP_REF |
link sampleRef |
reviewed |
SAMP_TYPE |
link sampleRef |
reviewed |
SAMP_ID |
link sampleRef |
reviewed |
SPEC_REF |
field name |
reviewed |
SPEC_DPTH |
field location |
reviewed |
SPEC_DESC |
field description |
reviewed |
SPEC_PREP |
not converted: specimen preparation text is not in the mapping | reviewed |
SPEC_BASE |
not converted: the base of a specimen has no target on a test located at a point | reviewed |
LDEN_TYPE |
not converted: the kind of density test is an AGS4 abbreviation with no DIGGS code | reviewed |
LDEN_COND |
not converted: read to leave out LDEN_BDEN and LDEN_MC of a recompacted specimen (DIGGS bulk_density and water_content_natural are natural conditions); the condition itself has no DIGGS code | reviewed |
LDEN_SMTY |
not converted: the sample type is an AGS4 abbreviation with no DIGGS code | reviewed |
LDEN_MC |
column water_content_natural |
reviewed |
LDEN_BDEN |
column bulk_density |
reviewed |
LDEN_DDEN |
column dry_density |
reviewed |
LDEN_METH |
not converted: test method text is not in the mapping | reviewed |
LDEN_LAB |
not converted: a laboratory is a business associate, which the converter does not write | reviewed |
LDEN_CRED |
not converted: no DIGGS 3.0.0 target for an accreditation | reviewed |
LDEN_REM |
field remark |
reviewed |
LDEN_DEV |
not converted: deviations from the method are not in the mapping | reviewed |
TEST_STAT |
not converted: no DIGGS 3.0.0 target for a test status | reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
SCPG¶
pattern test-table; status reviewed; keys LOCA_ID, SCPG_TESN; parent LOCA; DIGGS Test; procedure StaticConePenetrationTest; data group SCPT; written for AGS4 4.0.3, 4.0.4, 4.1, 4.1.1.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
LOCA_ID |
link samplingFeatureRef |
reviewed |
SCPG_TESN |
field name |
reviewed |
SCPG_TYPE |
not converted: read to leave out ball and T-bar tests (their resistance is not a cone resistance); the penetrometer type itself is not written | reviewed |
SCPG_REF |
not converted: cone test details are not in the mapping | reviewed |
SCPG_CSA |
not converted: cone test details are not in the mapping | reviewed |
SCPG_RATE |
not converted: cone test details are not in the mapping | reviewed |
SCPG_FILT |
not converted: cone test details are not in the mapping | reviewed |
SCPG_FRIC |
not converted: cone test details are not in the mapping | reviewed |
SCPG_WAT |
not converted: cone test details are not in the mapping | reviewed |
SCPG_WATA |
not converted: cone test details are not in the mapping | reviewed |
SCPG_ENV |
not converted: cone test details are not in the mapping | reviewed |
SCPG_CONT |
not converted: cone test details are not in the mapping | reviewed |
SCPG_METH |
not converted: cone test details are not in the mapping | reviewed |
SCPG_CRED |
not converted: cone test details are not in the mapping | reviewed |
SCPG_CAR |
not converted: cone test details are not in the mapping | reviewed |
SCPG_SLAR |
not converted: cone test details are not in the mapping | reviewed |
SCPG_OPER |
not converted: cone test details are not in the mapping | reviewed |
SCPG_REM |
field remark |
reviewed |
TEST_STAT |
not converted: no DIGGS 3.0.0 target for a test status | reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
SCPT¶
pattern test-table; status reviewed; keys LOCA_ID, SCPG_TESN, SCPT_DPTH; parent SCPG; DIGGS Test.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
LOCA_ID |
link Test |
reviewed |
SCPG_TESN |
link Test |
reviewed |
SCPT_DPTH |
field index.position |
reviewed |
SCPT_RES |
column tip_resistance |
reviewed |
SCPT_FRES |
column sleeve_friction |
reviewed |
SCPT_PWP1 |
column pore_pressure_u1 |
reviewed |
SCPT_PWP2 |
column pore_pressure_u2 |
reviewed |
SCPT_PWP3 |
column pore_pressure_u3 |
reviewed |
SCPT_QT |
column tip_resistance_corrected |
reviewed |
SCPT_CON |
not converted: DIGGS has conductivity, but uS/cm has no entry in the unit table | reviewed |
SCPT_TEMP |
column temperature |
reviewed |
SCPT_PH |
not converted: the bundled DIGGS 3.0.0 property dictionary has no property for this reading | reviewed |
SCPT_SLP1 |
not converted: a slope indicator reading; DIGGS inclination_x and inclination_y are per axis, and the converter does not choose | reviewed |
SCPT_SLP2 |
not converted: a slope indicator reading; DIGGS inclination_x and inclination_y are per axis, and the converter does not choose | reviewed |
SCPT_REDX |
not converted: DIGGS has redox_potential, but mV has no entry in the unit table | reviewed |
SCPT_MAGT |
not converted: the bundled DIGGS 3.0.0 property dictionary has no property for this reading | reviewed |
SCPT_MAGX |
not converted: the bundled DIGGS 3.0.0 property dictionary has no property for this reading | reviewed |
SCPT_MAGY |
not converted: the bundled DIGGS 3.0.0 property dictionary has no property for this reading | reviewed |
SCPT_MAGZ |
not converted: the bundled DIGGS 3.0.0 property dictionary has no property for this reading | reviewed |
SCPT_SMP |
column soil_moisture_content |
reviewed |
SCPT_NGAM |
not converted: the bundled DIGGS 3.0.0 property dictionary has no property for this reading | reviewed |
SCPT_FRR |
column friction_ratio |
reviewed |
SCPT_FT |
not converted: a value derived from the readings; the bundled DIGGS 3.0.0 property dictionary has no property for it | reviewed |
SCPT_QE |
not converted: a value derived from the readings; the bundled DIGGS 3.0.0 property dictionary has no property for it | reviewed |
SCPT_BDEN |
not converted: an assumed bulk density used in the derived values; no DIGGS property for this reading | reviewed |
SCPT_CPO |
not converted: an in situ stress used in the derived values; no DIGGS property for this reading | reviewed |
SCPT_CPOD |
not converted: an in situ stress used in the derived values; no DIGGS property for this reading | reviewed |
SCPT_ISPP |
not converted: an in situ pore pressure used in the derived values; no DIGGS property for this reading | reviewed |
SCPT_QNET |
not converted: a value derived from the readings; the bundled DIGGS 3.0.0 property dictionary has no property for it | reviewed |
SCPT_FRRC |
not converted: a value derived from the readings; the bundled DIGGS 3.0.0 property dictionary has no property for it | reviewed |
SCPT_EXPP |
not converted: a value derived from the readings; the bundled DIGGS 3.0.0 property dictionary has no property for it | reviewed |
SCPT_BQ |
not converted: a value derived from the readings; the bundled DIGGS 3.0.0 property dictionary has no property for it | reviewed |
SCPT_NQT |
not converted: a value derived from the readings; the bundled DIGGS 3.0.0 property dictionary has no property for it | reviewed |
SCPT_NFR |
not converted: a value derived from the readings; the bundled DIGGS 3.0.0 property dictionary has no property for it | reviewed |
SCPT_REM |
field remark |
reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
CPTG¶
pattern test-table; status reviewed; keys LOCA_ID, CPTG_TESN; parent LOCA; DIGGS Test; procedure StaticConePenetrationTest; data group CPTT; written for AGS4 4.2.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
LOCA_ID |
link samplingFeatureRef |
reviewed |
CPTG_TESN |
field name |
reviewed |
CPTG_TYPE |
not converted: read to leave out ball and T-bar tests (their resistance is not a cone resistance); the penetrometer type itself is not written | reviewed |
CPTG_APCL |
not converted: cone test details are not in the mapping | reviewed |
CPTG_CAR |
not converted: cone test details are not in the mapping | reviewed |
CPTG_CDDT |
not converted: cone test details are not in the mapping | reviewed |
CPTG_CFOA |
not converted: cone test details are not in the mapping | reviewed |
CPTG_CFOS |
not converted: cone test details are not in the mapping | reviewed |
CPTG_CORR |
not converted: cone test details are not in the mapping | reviewed |
CPTG_CPC |
not converted: cone test details are not in the mapping | reviewed |
CPTG_CPCL |
not converted: cone test details are not in the mapping | reviewed |
CPTG_CRDT |
not converted: cone test details are not in the mapping | reviewed |
CPTG_CSA |
not converted: cone test details are not in the mapping | reviewed |
CPTG_CSAN |
not converted: cone test details are not in the mapping | reviewed |
CPTG_DATE |
not converted: cone test details are not in the mapping | reviewed |
CPTG_DAZV |
not converted: cone test details are not in the mapping | reviewed |
CPTG_EQPT |
not converted: cone test details are not in the mapping | reviewed |
CPTG_FILL |
not converted: cone test details are not in the mapping | reviewed |
CPTG_FILT |
not converted: cone test details are not in the mapping | reviewed |
CPTG_FPC |
not converted: cone test details are not in the mapping | reviewed |
CPTG_FRIC |
not converted: cone test details are not in the mapping | reviewed |
CPTG_FRID |
not converted: cone test details are not in the mapping | reviewed |
CPTG_FRIS |
not converted: cone test details are not in the mapping | reviewed |
CPTG_LCA |
not converted: cone test details are not in the mapping | reviewed |
CPTG_MAN |
not converted: cone test details are not in the mapping | reviewed |
CPTG_ORNT |
not converted: cone test details are not in the mapping | reviewed |
CPTG_PED |
not converted: cone test details are not in the mapping | reviewed |
CPTG_RATE |
not converted: cone test details are not in the mapping | reviewed |
CPTG_REF |
not converted: cone test details are not in the mapping | reviewed |
CPTG_RLOC |
not converted: cone test details are not in the mapping | reviewed |
CPTG_SAT |
not converted: cone test details are not in the mapping | reviewed |
CPTG_SHA |
not converted: cone test details are not in the mapping | reviewed |
CPTG_SLA |
not converted: cone test details are not in the mapping | reviewed |
CPTG_SLAN |
not converted: cone test details are not in the mapping | reviewed |
CPTG_SLAR |
not converted: cone test details are not in the mapping | reviewed |
CPTG_TBD |
not converted: cone test details are not in the mapping | reviewed |
CPTG_TBL |
not converted: cone test details are not in the mapping | reviewed |
CPTG_TERM |
not converted: cone test details are not in the mapping | reviewed |
CPTG_UPC |
not converted: cone test details are not in the mapping | reviewed |
CPTG_WAT |
not converted: cone test details are not in the mapping | reviewed |
CPTG_WATA |
not converted: cone test details are not in the mapping | reviewed |
CPTG_OPER |
not converted: cone test details are not in the mapping | reviewed |
CPTG_CRED |
not converted: cone test details are not in the mapping | reviewed |
CPTG_METH |
not converted: cone test details are not in the mapping | reviewed |
CPTG_ENV |
not converted: cone test details are not in the mapping | reviewed |
CPTG_CONT |
not converted: cone test details are not in the mapping | reviewed |
CPTG_ANBY |
not converted: cone test details are not in the mapping | reviewed |
CPTG_DEV |
not converted: deviations from the method are not in the mapping | reviewed |
CPTG_REM |
field remark |
reviewed |
TEST_STAT |
not converted: no DIGGS 3.0.0 target for a test status | reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
CPTT¶
pattern test-table; status reviewed; keys LOCA_ID, CPTG_TESN, CPTT_REDN; parent CPTG; DIGGS Test.
| AGS4 heading | DIGGS target | Status |
|---|---|---|
LOCA_ID |
link Test |
reviewed |
CPTG_TESN |
link Test |
reviewed |
CPTT_REDN |
not converted: a reading number is not held: the readings are ordered by depth (DIGGS to AGS4 numbers them 1, 2, 3 ...) | reviewed |
CPTT_DPTH |
field index.position |
reviewed |
CPTT_QC |
column tip_resistance |
reviewed |
CPTT_FS |
column sleeve_friction |
reviewed |
CPTT_U1 |
column pore_pressure_u1 |
reviewed |
CPTT_U2 |
column pore_pressure_u2 |
reviewed |
CPTT_U3 |
column pore_pressure_u3 |
reviewed |
CPTT_QT |
column tip_resistance_corrected |
reviewed |
CPTT_PLEN |
not converted: the penetration length; the readings are indexed by depth (the PLEN index is a candidate for a later table) | reviewed |
CPTT_INCX |
column inclination_x |
reviewed |
CPTT_INCY |
column inclination_y |
reviewed |
CPTT_TIME |
not converted: a clock time; the converter writes result columns as numbers | reviewed |
CPTT_DUR |
column elapsed_time |
reviewed |
CPTT_TF |
not converted: the total thrust has no DIGGS 3.0.0 property | reviewed |
CPTT_RF |
column friction_ratio |
reviewed |
CPTT_BDEN |
not converted: an assumed bulk density used in the derived values; no DIGGS property for this reading | reviewed |
CPTT_CPO |
not converted: an in situ stress used in the derived values; no DIGGS property for this reading | reviewed |
CPTT_ISPP |
not converted: an in situ pore pressure used in the derived values; no DIGGS property for this reading | reviewed |
CPTT_CPOD |
not converted: an in situ stress used in the derived values; no DIGGS property for this reading | reviewed |
CPTT_FT |
not converted: a value derived from the readings; the bundled DIGGS 3.0.0 property dictionary has no property for it | reviewed |
CPTT_QNET |
not converted: a value derived from the readings; the bundled DIGGS 3.0.0 property dictionary has no property for it | reviewed |
CPTT_QE |
not converted: a value derived from the readings; the bundled DIGGS 3.0.0 property dictionary has no property for it | reviewed |
CPTT_RFT |
not converted: a value derived from the readings; the bundled DIGGS 3.0.0 property dictionary has no property for it | reviewed |
CPTT_EXPP |
not converted: a value derived from the readings; the bundled DIGGS 3.0.0 property dictionary has no property for it | reviewed |
CPTT_BQ |
not converted: a value derived from the readings; the bundled DIGGS 3.0.0 property dictionary has no property for it | reviewed |
CPTT_NQT |
not converted: a value derived from the readings; the bundled DIGGS 3.0.0 property dictionary has no property for it | reviewed |
CPTT_NFR |
not converted: a value derived from the readings; the bundled DIGGS 3.0.0 property dictionary has no property for it | reviewed |
CPTT_MAGX |
not converted: the bundled DIGGS 3.0.0 property dictionary has no property for this reading | reviewed |
CPTT_MAGY |
not converted: the bundled DIGGS 3.0.0 property dictionary has no property for this reading | reviewed |
CPTT_MAGZ |
not converted: the bundled DIGGS 3.0.0 property dictionary has no property for this reading | reviewed |
CPTT_MAGT |
not converted: the bundled DIGGS 3.0.0 property dictionary has no property for this reading | reviewed |
CPTT_MAGG |
not converted: the bundled DIGGS 3.0.0 property dictionary has no property for this reading | reviewed |
CPTT_CON |
not converted: DIGGS has conductivity, but uS/cm has no entry in the unit table | reviewed |
CPTT_TEMP |
column temperature |
reviewed |
CPTT_TPQC |
not converted: a sensor temperature; DIGGS temperature is the soil temperature (CPTT_TEMP) | reviewed |
CPTT_TPFS |
not converted: a sensor temperature; DIGGS temperature is the soil temperature (CPTT_TEMP) | reviewed |
CPTT_TPU |
not converted: a sensor temperature; DIGGS temperature is the soil temperature (CPTT_TEMP) | reviewed |
CPTT_PH |
not converted: the bundled DIGGS 3.0.0 property dictionary has no property for this reading | reviewed |
CPTT_REDX |
not converted: DIGGS has redox_potential, but mV has no entry in the unit table | reviewed |
CPTT_SMP |
column soil_moisture_content |
reviewed |
CPTT_NGAM |
not converted: the bundled DIGGS 3.0.0 property dictionary has no property for this reading | reviewed |
CPTT_FFD1 |
not converted: the bundled DIGGS 3.0.0 property dictionary has no property for this reading | reviewed |
CPTT_FFD2 |
not converted: the bundled DIGGS 3.0.0 property dictionary has no property for this reading | reviewed |
CPTT_PID |
not converted: the bundled DIGGS 3.0.0 property dictionary has no property for this reading | reviewed |
CPTT_FID |
not converted: DIGGS has flame_ionization_measurement, but uV has no entry in the unit table | reviewed |
CPTT_REM |
not converted: a reading remark has no place in a DIGGS result table | reviewed |
FILE_FSET |
not converted: files named in the FILE group are never opened or converted | reviewed |
Units¶
An AGS4 unit with no row here is reported as convert.unmapped-unit.
| AGS4 unit | DIGGS unit |
|---|---|
m |
m |
mm |
mm |
cm |
cm |
km |
km |
um |
um |
ft |
ft |
ftUS |
ft[US] |
in |
in |
% |
% |
kPa |
kPa |
MPa |
MPa |
kN/m2 |
kN/m2 |
bar |
bar |
kN |
kN |
N |
N |
kN/m3 |
kN/m3 |
Mg/m3 |
Mg/m3 |
g/cm3 |
g/cm3 |
kg |
kg |
g |
g |
deg |
dega |
DegC |
degC |
degC |
degC |
s |
s |
min |
min |
h |
h |
m/s |
m/s |
mg/kg |
mg/kg |
ppm |
ppm |
l |
L |
ml |
mL |
Codes¶
An AGS4 code with no row here, or with no DIGGS code, is reported as convert.unmapped-code. Codes are matched as AGS4 says abbreviations are, not case sensitive, and a value joined by the file's TRAN_RCON (+ by default) matches the row that joins the same codes in either order. Where two AGS4 codes share one DIGGS code, DIGGS to AGS4 writes the first; a value matching a later row is written as the DIGGS code and the AGS4 code is reported.
| AGS4 heading | AGS4 code | DIGGS element | DIGGS code |
|---|---|---|---|
LOCA_TYPE |
CP |
Borehole |
CP (boreholeType) |
LOCA_TYPE |
RC |
Borehole |
RC (boreholeType) |
LOCA_TYPE |
CP+RC |
Borehole |
CP-RC (boreholeType) |
LOCA_TYPE |
HA |
Borehole |
HA (boreholeType) |
LOCA_TYPE |
RO |
Borehole |
|
LOCA_TYPE |
WS |
Borehole |
|
LOCA_TYPE |
WLS |
Borehole |
|
LOCA_TYPE |
TP |
TrialPit |
the element itself |
LOCA_TYPE |
CPT |
Sounding |
|
LOCA_TYPE |
SCP |
Sounding |
|
LOCA_TYPE |
DP |
Sounding |
|
LOCA_TYPE |
SNC |
Borehole |
SNC (boreholeType) |
LOCA_TYPE |
VE |
Borehole |
VE (boreholeType) |
LOCA_TYPE |
VC |
Borehole |
VC (boreholeType) |
LOCA_TYPE |
AUGH |
Borehole |
HSA (boreholeType) |
LOCA_TYPE |
AUGS |
Borehole |
SSA (boreholeType) |
LOCA_TYPE |
TT |
TrialPit |
|
SAMP_TYPE |
U |
open_tube (sampleType) |
|
SAMP_TYPE |
UT |
thin_walled_tube (sampleType) |
|
SAMP_TYPE |
P |
piston (sampleType) |
|
SAMP_TYPE |
D |
small_disturbed (sampleType) |
|
SAMP_TYPE |
B |
bulk (sampleType) |
|
SAMP_TYPE |
LB |
large_bulk (sampleType) |
|
SAMP_TYPE |
BLK |
block (sampleType) |
|
SAMP_TYPE |
C |
rotary_core (sampleType) |
|
SAMP_TYPE |
W |
water_sample (sampleType) |
|
SAMP_TYPE |
G |
gas_sample (sampleType) |
|
SAMP_TYPE |
L |
windowless (sampleType) |
|
SAMP_TYPE |
SPTLS |
split_barrel_liner (sampleType) |
|
SAMP_TYPE |
M |
triple_tube_soil (sampleType) |
|
SAMP_TYPE |
TW |
thin_walled_tube (sampleType) |
|
SAMP_TYPE |
EW |
water_sample (sampleType) |
|
GRAT_TYPE |
WS |
Grading |
|
GRAT_TYPE |
DS |
Grading |
|
GRAT_TYPE |
HY |
Sedimentation |
the element itself |
Coordinate reference systems¶
LOCA_GREF names the CRS of LOCA_NATE and LOCA_NATN; EPSG:<number> is read as that EPSG code, and an AGS4 4.2 LOCA_NSRI (an EPSG code) is read before LOCA_GREF, which is reported when it disagrees. LOCA_LLZ names the datum of LOCA_LAT and LOCA_LON, and a 4.2 LOCA_LLSI is read before it. Any other value is reported, and nothing is guessed from the coordinates. Grid coordinates and ground levels are written only in the unit of the CRS's axes. A ground level is written as the third coordinate: in the compound CRS a LOCA_NATD row gives with its horizontal CRS, and otherwise in the grid CRS, which does not state the level's vertical datum (reported as convert.assumed). Values are matched not case sensitively. DIGGS to AGS4 writes the first row of each CRS, and for AGS4 4.2 also LOCA_NSRI or LOCA_LLSI.
| AGS4 heading | AGS4 value | DIGGS srsName | Axis unit | With horizontal CRS |
|---|---|---|---|---|
LOCA_GREF |
OSGB |
http://www.opengis.net/def/crs/EPSG/0/27700 |
m |
|
LOCA_GREF |
OSGB36 |
http://www.opengis.net/def/crs/EPSG/0/27700 |
m |
|
LOCA_GREF |
British National Grid |
http://www.opengis.net/def/crs/EPSG/0/27700 |
m |
|
LOCA_GREF |
ITM |
http://www.opengis.net/def/crs/EPSG/0/2157 |
m |
|
LOCA_GREF |
Irish Grid |
http://www.opengis.net/def/crs/EPSG/0/29903 |
m |
|
LOCA_GREF |
OSI |
http://www.opengis.net/def/crs/EPSG/0/29903 |
m |
|
LOCA_NATD |
OD Newlyn |
http://www.opengis.net/def/crs/EPSG/0/7405 |
m |
http://www.opengis.net/def/crs/EPSG/0/27700 |
LOCA_NATD |
ODN |
http://www.opengis.net/def/crs/EPSG/0/7405 |
m |
http://www.opengis.net/def/crs/EPSG/0/27700 |
LOCA_NATD |
Ordnance Datum Newlyn |
http://www.opengis.net/def/crs/EPSG/0/7405 |
m |
http://www.opengis.net/def/crs/EPSG/0/27700 |
LOCA_LLZ |
WGS84 |
http://www.opengis.net/def/crs/EPSG/0/4326 |
||
LOCA_LLZ |
WGS 84 |
http://www.opengis.net/def/crs/EPSG/0/4326 |
||
LOCA_LLZ |
ETRS89 |
http://www.opengis.net/def/crs/EPSG/0/4258 |